Reliable marine navigation systems in Lymington help you make informed decisions on the water. Accurate positioning, route planning, radar, depth information and vessel data all need to be clear, dependable and properly connected.
We install, upgrade and support navigation equipment for sailing yachts, motor yachts and other vessels. Whether you are modernising older equipment, resolving an intermittent fault or planning a complete navigation refit, we take time to understand your requirements and recommend a suitable approach.
Deep Blue Navigation supplies and installs a wide range of marine navigation systems in Lymington, from essential individual devices to fully integrated networks. We are dealer trained in Garmin, Raymarine, Simrad, B&G, Fusion, JL Audio and Furuno equipment, allowing us to work with many of the leading marine brands.
A modern chartplotter or multifunction display can bring charting, GPS, AIS, radar, sonar and vessel information together on one clear, accessible screen. We provide marine chartplotter installation for sailing yachts and motor vessels, including replacement of outdated units, display upgrades and complete multifunction display installation.
We can also configure new equipment and integrate it with compatible existing systems, including Garmin installation for yachts in Lymington, Raymarine upgrades and Simrad installations.
Reliable GPS data supports accurate positioning, route planning and many other onboard navigation functions.
If your position is inaccurate, slow to update or repeatedly loses signal, we can inspect the GPS antenna, display, wiring, power supply and network connections to identify the cause.
Our GPS services include installation and replacement, position accuracy checks, chartplotter and marine network integration, configuration of GPS data sources, and troubleshooting of signal or antenna issues.
Radar is an important navigation aid in reduced visibility, at night and in busy waters. We install, replace and configure radar systems, ensuring scanners are suitably positioned and correctly connected to compatible multifunction displays.
Our work includes radar installation, replacement, upgrades for older systems, chartplotter integration, configuration and setup, as well as fault finding for poor, missing or unreliable radar data. We also inspect relevant power supplies, network connections and scanner cabling.
Automatic Identification Systems provide useful information about other AIS-equipped vessels, including their identity, position, course and speed. When displayed through a compatible chartplotter, AIS can improve awareness of nearby traffic and support safer passage planning.
We provide AIS installation on boats, including receiver and transceiver replacement, chartplotter and VHF integration, vessel information configuration and operational testing. We can also investigate missing targets, unreliable AIS data and other AIS-related faults.
A properly installed and calibrated autopilot can reduce workload at the helm and make longer passages more comfortable. Because autopilot performance depends on suitable steering components, sensors, power supplies and accurate setup, careful installation and commissioning are essential. We provide autopilot installation, upgrades, calibration and commissioning, alongside integration with chartplotters and GPS data.
We can also carry out heading sensor and compass checks, diagnose autopilot faults, and investigate systems that fail to hold course or do not respond as expected.
Dependable onboard communications are essential for safety and practical day-to-day use. We install and replace marine VHF radios, antennas and associated equipment, with consideration given to sensible equipment positioning, reliable connections and compatibility with the wider navigation system.
Our VHF services include radio and antenna installation, replacement units, GPS and DSC integration, chartplotter connections where appropriate, and fault finding for communication, transmission or reception problems.
Depth and sonar information can be invaluable for coastal cruising, fishing and navigating unfamiliar waters. We install and integrate depth sounders, fishfinders, sonar systems, transducers and compatible displays, whether as standalone equipment or as part of a networked navigation system.
Our service includes transducer installation and replacement, display integration, configuration of compatible networked equipment, and fault finding where depth or sonar data is missing, inaccurate or unreliable.
For professional marine electronics in Lymington, we consider your vessel's complete onboard system,not just the individual item. Whether you are upgrading, integrating or diagnosing a fault, contact us to discuss the right solution.
Call Us Email Us Reach Out Today
From connecting existing equipment to installing new systems and diagnosing faults, we provide practical navigation solutions tailored to your vessel.
We connect compatible chartplotters, GPS, radar, AIS, autopilots, depth sounders and onboard sensors so important information can be shared reliably.
This includes marine network setup, selecting suitable data sources, configuring displays and alarms, and testing communication between connected equipment before commissioning.
Navigation faults are not always caused by the device that appears to have failed. Problems can stem from wiring, power supplies, poor connections, network faults or incorrect configuration.
We diagnose blank or restarting displays, lost GPS signals, missing radar or AIS data, autopilot issues and devices that are not communicating correctly before recommending repair or replacement.
We assess your vessel, current equipment and intended use before planning suitable display positions, cable routes, power protection and data connections.
Once installed, we configure, calibrate and test your new navigation equipment, ensuring it is properly integrated with compatible onboard systems before handover.
We specialise in marine navigation and onboard electrical systems. This means we understand the practical challenges of installing and maintaining equipment in a marine environment.
We install equipment with care and attention to positioning, cable routing, electrical connections, configuration and final testing.
Where equipment is unreliable, we investigate the likely cause before advising that it should be replaced. This can prevent unnecessary cost and disruption.
Navigation equipment must work with the wider onboard electrical and electronic system. We look beyond the individual device to ensure connections, power and data sharing are properly considered.
Deep Blue Navigation provides direct, professional communication throughout the project. We work with you to deliver a navigation system that is clear, practical and dependable.
We recommend solutions based on your vessel, existing equipment, intended use and budget. We aim to provide the right solution, not simply the most extensive one.
Based in Lymington, we provide marine navigation systems in Lymington for yacht and boat owners across the South Coast of the UK and, where required, Europe. We regularly support vessels in Lymington, Hythe, Beaulieu and Christchurch.
Whether you require a Garmin, Raymarine, Simrad, B&G or Furuno installation, an equipment upgrade, a radar fault diagnosis or a complete navigation refit, we can provide a tailored service for your vessel.
We also provide marine audio installation, yacht internet connectivity, custom dashboards, switching, mast electronics, rewires and electrical fault finding.
We install and upgrade chartplotters, multifunction displays, GPS systems, radar, AIS, autopilots, VHF radios, depth sounders, fishfinders, sonar, transducers and marine network equipment for yachts and boats.
Yes. We provide boat GPS and chartplotter installation in Lymington, including equipment positioning, power and data connections, network integration, configuration and final operational testing.
Yes. We assess your existing marine navigation system and can replace obsolete displays, GPS receivers, radar, AIS or other equipment while retaining compatible devices where practical.
Yes. We provide marine radar installation, replacement, setup and fault finding. This includes checking scanner positioning, power and network connections, chartplotter integration and radar configuration.
Yes. We integrate compatible radar, GPS, chartplotter, AIS, autopilot and depth data so information is displayed and shared correctly across your onboard marine electronics system.
Yes. We install AIS receivers and transceivers, configure vessel information and connect AIS data to compatible chartplotters and VHF equipment for improved awareness of nearby vessel traffic.
In many cases, yes. We check the compatibility of your existing equipment, cabling, power supply and marine network before recommending the most practical way to integrate new devices.
Yes. We discuss your vessel, current equipment, cruising plans, preferred helm layout and budget, then recommend suitable navigation equipment from leading brands including Garmin, Raymarine, Simrad, B&G and Furuno.
